Swan

This device cannot show the 3D view. Follow the step pictures and text below instead.

1. 

   1. Crease the diagonal

   White side up as a diamond. Fold the left corner to the right corner and unfold.

2. 

   2. Kite fold

   From the bottom corner, fold the two lower edges to the centre crease. It looks like a kite.

3. 

   3. Turn over

   Turn the whole model over.

4. 

   4. Narrow it again

   Fold the two lower edges to the centre crease again. The bottom becomes long and sharp.

5. 

   5. Fold the point up (neck)

   Fold the sharp bottom point up to meet the top corner. This becomes the neck.

6. 

   6. Turn it sideways

   Rotate the paper a quarter turn so the neck tip points left.

7. 

   7. Fold the head

   Fold the tip of the top flap (the neck) a little to the right to make the head.

8. 

   8. Fold in half (mountain)

   Fold the top half behind along the centre line.

9. 

   9. Pull the neck up

   Open the body a little, pull the neck up, then close the body in half again and flatten.

10. 

    10. Pull the head out

    Draw the folded head at the tip of the neck out to the front and flatten it.

11. 

    11. Stand it up — done

    Stand the body up and your swan is done!