Fukusuke (lucky doll)

This device cannot show the 3D view. Follow the step pictures and text below instead.

1. 

   1. Fold in half and unfold

   White side up. Fold the bottom edge to the top edge and unfold, then fold the left edge to the right edge and unfold.

2. 

   2. Fold the four corners to the centre

   Fold each of the four corners to the centre point. You get a smaller diamond.

3. 

   3. Fold the corners to the centre again

   Without turning over, fold the four new corners to the centre point again. You get a small square.

4. 

   4. Turn over; turn to a diamond

   Turn over so the folded flaps are underneath. Then turn the square so one corner points up, like a diamond.

5. 

   5. Fold the upper edges to the centre

   Fold the upper left and upper right edges to the vertical centre line, on creases that start at the top point. The side corners meet in the middle.

6. 

   6. Turn over

   Turn over. The side with the double-folded corners is up.

7. 

   7. Pull out the upper flaps

   Swing the upper left and upper right triangular flaps outwards. Each one turns over its folded edge and lies flat outside: together they make a big diamond for the head.

8. 

   8. Turn over

   Turn over. The big diamond head is on top.

9. 

   9. Fold the top of the head down

   Fold everything above the line joining the head’s side corners down. A small diamond hidden behind comes over with it and becomes the face; pointed shoulders stick out on both sides.

10. 

    10. Fold the bottom point behind

    Fold the bottom point behind, on the horizontal line through the lower ends of the side flaps. Draw a face and your Fukusuke is done!