Skip to content
Paper Play

Everyday & decor

Fukusuke (lucky doll)

Fukusuke, the Japanese good-luck doll: a big head and stiff shoulder wings (kamishimo). Draw the face with a pen.

  • DifficultyIntermediate
  • PaperSquare, 15 × 15 cm
  • Steps10
  • About8 min

Why this level: The corner folds are easy, but pulling the hidden flaps out for the head and folding the head down move several layers at once.

You need: 1 sheet of origami paper, A pen to draw the face

Preview Preview: checked on screen; real-paper verification is in progress.

Start folding

Steps at a glance

  1. 1. Fold in half and unfold

    White side up. Fold the bottom edge to the top edge and unfold, then fold the left edge to the right edge and unfold.

  2. 2. Fold the four corners to the centre

    Fold each of the four corners to the centre point. You get a smaller diamond.

  3. 3. Fold the corners to the centre again

    Without turning over, fold the four new corners to the centre point again. You get a small square.

  4. 4. Turn over; turn to a diamond

    Turn over so the folded flaps are underneath. Then turn the square so one corner points up, like a diamond.

  5. 5. Fold the upper edges to the centre

    Fold the upper left and upper right edges to the vertical centre line, on creases that start at the top point. The side corners meet in the middle.

  6. 6. Turn over

    Turn over. The side with the double-folded corners is up.

  7. 7. Pull out the upper flaps

    Swing the upper left and upper right triangular flaps outwards. Each one turns over its folded edge and lies flat outside: together they make a big diamond for the head.

  8. 8. Turn over

    Turn over. The big diamond head is on top.

  9. 9. Fold the top of the head down

    Fold everything above the line joining the head’s side corners down. A small diamond hidden behind comes over with it and becomes the face; pointed shoulders stick out on both sides.

  10. 10. Fold the bottom point behind

    Fold the bottom point behind, on the horizontal line through the lower ends of the side flaps. Draw a face and your Fukusuke is done!

Settings

Clear saved data