Japanese house

This device cannot show the 3D view. Follow the step pictures and text below instead.

1. 

   1. Crease the centre

   White side up. Fold in half, left edge to right edge, and unfold.

2. 

   2. Fold the sides to the centre

   Fold the left and right edges to the centre line. The square is now in quarters, folded into a tall strip.

3. 

   3. Turn the two right corners in

   Inside reverse fold the top and bottom corners of the folded right edge, pushing each one in between the two layers. The slanted fold runs from the middle of the end to a point a quarter of the way along the right edge. The right corners now look cut off.

4. 

   4. Ends behind, triangles in front

   Fold the top quarter behind, but leave the small triangle at the top right (the front layer only) in front. Fold the bottom quarter behind the same way. The two triangles left in front become the eaves.

5. 

   5. Turn it on its side

   Turn the model so the side with the triangles is at the top. The top half is the roof with its eaves, the bottom half is the wall.

6. 

   6. Open the side walls and stand it up

   Open the two folded-back ends until they stand at right angles behind the front, as side walls. Stand the house up and it is done!